1982-2002 Chevrolet Camaro - Lower Control Arm Relocation Brackets Weld-In (Moser Housings) - UMI Performance # 2011


Welcome to Code510

Shopping Cart: $0.00

You have no items in your shopping cart.

1982-2002 Chevrolet Camaro - Lower Control Arm Relocation Brackets Weld-In (Moser Housings) - UMI Performance # 2011

More Views

1982-2002 Chevrolet Camaro - Lower Control Arm Relocation Brackets Weld-In (Moser Housings) - UMI Performance # 2011

Be the first to review this product

1982-2002 Chevrolet Camaro - Lower Control Arm Relocation Brackets Weld-In (Moser Housings) - UMI Performance # 2011

*Only Fits Moser Engineering 12 Bolt and 9" Housings

UMI Performance # 2011


Availability: In stock

$89.99

1982-2002 Chevrolet Camaro - Lower Control Arm Relocation Brackets Weld-In (Moser Housings) - UMI Performance # 2011



Applications:
1982-2002 GM F-Body -1982 - 2002 Chevrolet Camaro

*Fits Moser Engineering 12 Bolt and 9" Housings
Reposition your instant center by changing your lower control arm angle for improved traction. Brackets lower the rear of the control arm up to 3", a must for all lowered vehicles to correct lost suspension geometry. By lowering your vehicle, you are changing the lower control arm angle allowing the rear mounting point to sit higher than the front. This will, in return, cause wheel hop and a great deal of traction loss.

Lowered Vehicles: We do not recommend lowering a 3rd or 4th generation F-Body without lower control arm relocation brackets due to the compromise in the geometry on the instant center. Brackets will significantly improve instant center position, eliminate wheel hop and increase traction. Brackets installed will also help 60-foot times of .10 or better, lower ETs and increase track consistency--a must for all lowered vehicles!

Non-Lowered Vehicles: Product installed on a stock height vehicle will also see a great increase in traction by lowering the rearward angle of the lower control arm, allowing more force to be placed on the rear tires. Relocation brackets have two settings to allow the lower control arm to be lowered either 2" or 3", depending on your preference. Settings are placed in a correct pattern that will allow use of all OEM control arms or any aftermarket control arm (brackets do not require a longer control arm.) Brackets installed on a non-lowered F-Body provide a .10 or better 60-foot; reduction and an increase in track consistency.

Installation:
Brackets are Weld-in only and install in approximately 1 - 1-1/2 hours. All hardware and installation instructions are included with each kit.

Additional Information

Brand UMI performance Suspension at Code 510

UMI Performance Suspension

Year 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Make Chevy
Model Camaro

Customer Reviews

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality

Use spaces to separate tags. Use single quotes (') for phrases.